Can an indoor vending machine go beside a wash-down area?

Spread the love

At a food plant, leisure centre or workshop, a spot can look dry during a site survey and receive spray every evening. Before placing an indoor vending machine near a wash-down area, show the supplier the complete cleaning routine. Ask for written confirmation that the precise model and position suit the conditions. A successful test purchase on a dry afternoon cannot answer that installation question.

A facilities manager reviews the dry vending lobby separated from a tiled wash-down room.
AI-generated illustration using a SandenVendo G-Snack Evolution AMX catalogue reference.

Walk the boundary during a normal clean

Start with the person who actually cleans the area. Ask where water is applied, where it drains, which doors stand open and where equipment is parked between jobs. Observe from a safe position during a normal cleaning cycle. Include neighbouring surfaces, the floor in front of the machine and the route water takes when a trolley is moved through a doorway.

Mark those observations on a simple plan. A tiled wall or painted line on the floor may divide departments without stopping spray or pooled water. Consider whether a closed partition, a separate staff lobby or another genuinely dry room offers a more suitable location. Have the competent site team assess the environment and electrical services. Leave any technical protection or installation decision to the people responsible for that equipment.

Check the machine’s own instructions

Ask the supplier to identify the instructions for the exact cabinet being offered. An outdoor product description or the appearance of a steel panel on another model is insufficient evidence for using a particular cleaning method. Explain whether the cabinet will be exposed to direct spray, cleaning chemicals, moisture carried on footwear or condensation from adjacent work.

The published vending service guide describes model-specific cleaning precautions and advises against water jets for the G-Snack equipment covered by its guide. Give the cleaning contractor the actual instructions and the approved division of work. Moving a machine away from a hose on cleaning night is not a substitute for agreeing a suitable permanent installation.

Plan access when the neighbouring room is closed

Check how customers and refill staff will reach the dry position while cleaning is under way. A machine in a dry lobby is little use if everyone has to cross a cordoned wet floor to buy a drink. Draw the customer route and the trolley route separately. Check where a person will stand while paying or collecting an item and whether the service door can open without entering the cleaning zone.

Include the night and weekend teams in that walk-through. Ask who can pause sales or redirect people if the usual route is temporarily unsafe. Our guide to a spill near vending equipment describes the distinction between managing the floor and working on the machine.

Record the approved position

Keep the dated location drawing, supplier approval and cleaning instructions with the site handover. Identify the person who reviews any proposed change to chemicals, equipment, door positions or room use. If water reaches a cabinet unexpectedly, keep people away and contact the responsible site team and operator for assessment before returning it to use.

When comparing vending options for an Irish workplace, describe the conditions during cleaning as carefully as the conditions during trading. The right question is whether the service can operate safely across the whole working week.

Discuss an installation survey for your premises

Skip to toolbar