What is a vending machine spiral and how does it work?

Spread the love

A vending machine spiral is the coiled part you can see in many snack rows. You may also hear suppliers call it a coil or helix. It holds products in the spaces between its turns. When the mechanism rotates, it moves the front product towards the delivery edge. For the person ordering snacks, the important detail is how the actual wrapped pack fits that row.

Snack and drinks vending machines installed beside a green interior wall
Installation photograph from the Vending-Machines.ie Facebook page.

Why does the packet matter?

Compare a flat chocolate bar with a pillow-shaped bag of crisps. Their weights might be similar, but they occupy space differently. A bag can be wide across its sealed edges and thick in the middle. A box can have a firm corner that catches on the side of the tray. Take a sample in its normal retail packaging when asking a supplier to assess a new product.

Measure the widest part of the pack, its depth and its height in the proposed position. Include the crimped edge or any flap. Then ask the operator to check the whole route from the row to the collection compartment. A pack that fits between two turns still has to leave the shelf and reach the customer intact. This is especially important with a fragile biscuit or a pack that opens easily.

What should you ask the supplier?

Identify the machine and selection number first. A photograph of the shelf helps the supplier understand which row you mean. Ask for the correct spiral for that tray, the intended product orientation and the number of packs the row can hold. If a supplier offers a replacement part, ask for a part reference matched to the machine. Keep that reference with the site record so the next person can order the same item.

Features vary by model. For example, SandenVendo describes adjustable spiral positions and optical delivery detection for its G-Snack range. Check the manual for your own cabinet before relying on those features. The photograph accompanying this guide shows a real snack installation. Identify the mechanism from the machine documentation before ordering a spare or changing a setting.

Run a short product test

Ask the operator to load a representative row and make a test purchase. Watch how the first pack leaves the shelf, then check the wrapper in the collection compartment. Repeat with a pack from further back in the row. Note any pack that twists sideways or stays behind. Record the product name, pack size and selection number so the operator can reproduce the result.

If a product hangs, record the symptom before another sale. Ask the person responsible for the machine to take the selection out of use while they investigate. A customer should use the contact details on the cabinet and leave the machine in place. A photograph of the affected selection and the time of the purchase will give the operator a more useful starting point than a general report that the machine is broken.

Review the row when the packaging changes

A refill can bring a new pack design even when the product name is familiar. Check the first delivery after a packaging change against the tested sample. If the fit has changed, arrange another vend test before filling the whole row. Keeping this check in the refill routine can save both a wasted case of stock and a series of customer refund enquiries.

When comparing snack vending machines, bring sample packs to the demonstration. Our guide to choosing vending snacks explains how to review sales once a row is working. For advice on your own cabinet, send the model and selection details.

Skip to toolbar